HL steel tubular adhesive

HL steel tubular adhesive
HL steel tubular adhesive
HL steel tubular adhesive

معرفی محصول

This product is packed in a 150ml twin tubular. Package contents include: Black part of adhesive(resin) A and red part of adhesive(hardener or dryer) B, spatula for picking up and mixing bowl contents, abrasive and cloth inside the box are used for cleaning the surface.

*adhesive’s weight: 14 ml

expire:12 months after production

2-10 minutes Initial drying time

*Product’s color:Color of product contains two parts which are black and red that becomes clear after drying > 0/4mm spectrum milky amber < 0/4mm

Thermal Resistance: 130C⁰

Pasting different kinds of metals to each other and other objects such as: plastics, rubbers, stone , granite, earthenware and industrial earthenware, porcelain and polyester. With thermal resistance of 130 C ⁰ is suitable for reparation and pasting car cylinder, car oil cartel, radiator, metal pipe, heater, radiant, fuel tank, wing mirror, rear-view mirror, water tankers, acid and chemical materials.

قیمت این محصول با کیت(ریال)dont

تعداد در بسته این محصول : 30

تعداد در کارتن این محصول : 360

تعداد کارتن با کیت این محصول : not exist

HL steel tubular adhesive
HL steel tubular adhesive

How to use

First sand, clean and dry the place.

Mix equally two parts of adhesive by spatula which is inside the box for 3 to 6 laps and quickly rub it to the place and avoid moving parts for a least 7 minutes

For better sealing of steel glue use black part 20% more. In this case glue dries a little later but resistance will increase.

No success

1- No glue can paste Polyethylene plastic and PP

2- Moving parts during drying

Contact surface was under 〖2mm〗^2

4- Low reflex

5- Using red part more(hardener or dryer)

6- Not drying the place

7- Not cleaning former glues from surface

8- HL Glue doesn’t paste silicone layer

HL steel tubular adhesive
HL steel tubular adhesive

شبکه اجتماعی محصول



بیشتر


  • First sand, clean and dry the place.
  • Mix equally two parts of adhesive by spatula which is inside the box for 3 to 6 laps and quickly rub it to the place and avoid moving parts for a least 7 minutes.
  • For better sealing of steel glue use black part 20% more. In this case glue dries a little later but resistance will increase.

کارخانه چسب هل

سفارش محصول


ارتباط با ما

ارسال نظرات

آدرس

ایران

تبریز / پلیس راه تبریز ، تهران

اول جاده باسمنج / روبه روی کلرپارس

جنب آذران پلاستیک / کارخانه چسب هل

تلفن تماس :989300031616+

تلفن تماس مستقیم:7-04136301361

Email : info@HLGLUE.com

© 2018 HLGLUE. All Rights Reserved | Developed by HLGLUE Programming Team